5分pk拾计划软件

皇菠萝服务热线:

0531-66729399

黄菠萝动态

  • 黄菠萝动态

联系我们

  • 电话:0531-66729399
  • 13176668190
  • 邮编:250000
  • 邮箱:polo-king@163.com
  • 公司地址:济南工业北路通运汽配城2排18号
位置:5分pk拾计划软件 > 黄菠萝动态 >

黄菠萝动态

快速钣金喷漆清洁的通常需求有哪些

时间:2015-04-30 13:11 来源:未知 已浏览: 次
  • (1)清洁速度快,在清洁机技术设定的清洁时间内,可彻底地除掉金属外表污物

    (1) cleaning speed, in the setting of cleaner technology cleaning time, can thoroughly remove the metal surface dirt

    (2)对清洁机和被清洁零部件无腐蚀性

    (2) non corrosive to clean and clean machine parts

    (3)清洁剂成本低,环保、气味温文

    (3) cleaning agent, low cost, environmental protection, the smell of Wen Wen

    (4)清洁进程中,不在清洁目标外表残留不溶物,不发生新污物,不构成新的有害于后续工序的掩盖层,不影响产品质量。

    (4) in the process of cleaning, cleaning is not in the target appearance of insoluble residue, no new dirt, does not constitute a new harmful to the subsequent process of cover layer, do not affect the quality of products.

    快速钣金喷漆常用的金属清洁设备包括: 1、浸入式清洁 2、喷淋清洁 3、高压喷淋清洁,4、超声波清洁

    Fast metal cleaning spray painted sheet metal equipment commonly used include: 1, 2, immersion cleaning spray cleaning 3, high-pressure spray cleaning, ultrasonic cleaning, 4

    关于浸入式清洁通常清洁的零部件为多腔体,需求清洁剂具有较强的清洁才能,关于清洁剂消泡功能需求不高,但需求清洁剂具有必定的乳化杂油的才能,这样保证零部件在清洁并被取出清洁剂后不会被清洁掉的杂油二次污染零部件外表。乳化杂油才能强的清洁剂缺陷是清洁剂清洁才能逐渐下降,致使清洁剂运用寿命较短。

    Immersion.com usually clean clean parts for multi cavity, needs cleaning agent with strong cleaning ability, a cleaning agent defoaming function demand is not high, but the demand for cleaning agent has certain emulsifying oil mixed ability, so that the two parts of mixed oil pollution will not spare parts in appearance clean and removed after cleaning agent clean out. Emulsion cleaner oil to the strong clutter defect is clean to clean agent decreased gradually, resulting in cleaner use of short life.

    轿车变速箱零部件清洁大多选用通过式喷淋清洁机,通常分为清洁-漂洗-烘干三个进程,单个依据技术需求而改变,清洁-清洁-漂洗-烘干或清洁-漂洗-漂洗-烘干,喷淋清洁机配有撇油器,选用抗杂油才能较强的清洁剂能够进步清洁剂的运用寿命。清洁的变速箱零部件原料通常为锻钢,零部件外表污物多为低粘度切削油,选用清洁剂时在思考清洁才能的一起要思考清洁剂的消泡才能,通常情况下,跟着清洁剂温度的升高,其去污才能也随之进步,但超越必定温度后,去污才能反而下降,引荐清洁剂时要思考一个最适合的温度规模。另一方面,因为漂洗清洁剂浓度通常较低,规模在0.5%-1.5%,需求清洁剂具有较好的防锈才能。

    The car gearbox parts are selected by cleaning spray cleaning machine, is usually divided into three clean - Rinse - drying process, technical requirements and individual basis change, clean - clean - Rinse - dry or clean - Rinse - Rinse - drying, spray cleaning machine equipped with the skimmer, with strong ability to clean oil anti clutter agent can progress cleaning agent using life. Clean the gearbox parts materials usually forged steel parts, surface dirt is low viscosity oil cleaning agent selection cutting, thinking to clean together to think about cleaning agent, defoaming ability, under normal circumstances, with the increase of temperature of the cleaning agent, decontamination can also with progress, but certainly beyond the temperature in order to decrease, decontamination, recommended cleaning agents must consider when one of the most suitable temperature scale. On the other hand, because the washing detergent concentration is low, the scale of demand in 0.5%-1.5%, cleaning agent has good anti rust ability.

    高压喷淋清洁机多用于去掉零部件外表污物的一起去掉金属外表毛刺,对零件多选用定位、定点喷淋方法,需求清洁剂在高压下有极好的反抗泡沫才能。一些特定技术条件下,引荐清洁剂时必须要思考后边工序的影响,如在变速箱轴、齿出产某一技术流程:磨齿-喷淋清洁(中心清洁)-抛丸-喷淋清洁(终洗),其间喷淋中心清洁进程要思考下一道喷丸工序,清洁剂清洁零件烘干后,零部件外表不能有粘性清洁剂残留或掩盖膜,不然将会影响喷丸工序,带来质量缺陷。如果在有条件的情况下,建议制造清洁剂选用去离子水会带来许多优点。在轴、齿加工进程中有大量的热处理技术,去离子水可保证批量出产的质量,下降热处理技术的废品率。因为在工件进入热处理设备前,需要对工件进行清洁,清洁的意图除了去掉金属外表的颗粒杂质外,还要尽可能削减盐成分的残留以进步热处理的质量。所以,选用去离子水进行配液,这样能够大大下降水中带来的各类离子残留在热处理外表对热处理发生欠好的影响。

    High pressure spray cleaning machine used to remove surface dirt of the metal parts together to remove burrs on the appearance, parts localization, fixed-point spray method under high pressure, the demand of cleaning agent has excellent resistance to foam. Some specific technical conditions, recommended cleaning agents must influence the thinking behind the process, such as the transmission shaft, a gear production process: grinding - spray cleaning (cleaning center) - shot - spray cleaning (final wash), the center of the cleaning process to spray a shot peening process thinking, clean the cleanliness of parts after drying, the appearance of parts not sticky detergent residue or cover film, otherwise will influence the shot peening process, quality defects. If in the case of conditions, recommended making cleaner deionized water will bring many advantages. There are a lot of heat treatment technology in shaft, gear machining process, water quality can be guaranteed for mass production, decrease scrap rate of heat treatment technique. Because of the heat treatment equipment in the workpiece before, need to clean the workpiece, clean the impurities of metal particles in addition to the intention of appearance, but also as far as possible residual salt reduction components in order to improve the quality of heat treatment. So, using deionized water with liquid, it can greatly decrease the water brought by all kinds of ion residues in the heat treatment surface of bad effect on heat treatment.

一键拨号
北京pk10玩法介绍 金丰彩票APP下载 北京11选5走势图 五分pk拾 pk10玩法介绍 pk10玩法规则 北京11选5投注 北京11选5计划 北京pk10开奖 北京11选5投注